screws › machine screws
NAS1101E4H10
Machine Screw
Description
Fastener Length: 5/8", Hole Diameter: ", Thread: 1/4-28, Thread Length: 5/8
Specifications
| Fastener Length | 0.594 inches minimum and 0.625 inches maximum |
|---|---|
| Head Diameter | 0.367 inches minimum and 0.375 inches maximum |
| Head Height | 0.133 inches minimum and 0.150 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Flat chamfer |
| Hole Diameter | 0.060 |
| Hole Quantity | 1 |
| Internal Drive Style | Torque set |
| Length | 5/8 |
| Material | Iron |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Screw Material | Iron alloy 660 |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Specification Data | 80205-nas1101 professional/industrial association standard |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.523 inches minimum and 0.625 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNJF |
| Thread Size | 1/4 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- NAS1101E4H10
- NAS1101E4H12
- NAS1101E4H16
Cross-reference
No interchangeable or dimensionally similar parts are on record for NAS1101E4H10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error