nuts › plain hexagon nuts
MS9360-13
Military Standard Nut
Description
Thread Size: 1/2", Nut Height: 3/8", Head Width: 5/8"
Specifications
| Bearing Surface Finish | 63.0 microinches |
|---|---|
| Bearing Surface Type | Washer faced |
| Countersink Angle | 90.0 degrees nominal nut |
| Drilled Hole Diameter | 0.070 |
| Hole Configuration Style | Configuration b |
| Hole Type And Quantity | 2 drilled |
| Material | Iron |
| Material Specification | Ams 5737 assn std single material response or ams 5732 assn std single material response |
| Nut Height | 0.365 inches minimum and 0.385 inches maximum |
| Nut Style | Hexagon |
| Precious Material | Silver |
| Surface Treatment | Silver |
| Surface Treatment Specification | Ams 2410 assn std single treatment response |
| Thread Class | 3b |
| Thread Direction | Right-hand |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series | UNJF |
| Thread Size | 0.438 |
| Width Across Flats | 0.679 inches minimum and 0.690 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS51972-4 MS 7/16-20 · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error