nuts › plain hexagon nuts
MS9200-10
Military Standard Nut
Description
Thread Size: 7/8", Nut Height: 3/8", Head Width: 1-1/8"
Specifications
| Bearing Surface Finish | 63.0 microinches |
|---|---|
| Bearing Surface Type | Chamfered or washer faced |
| Countersink Angle | 105.0 degrees minimum nut and 115.0 degrees maximum nut |
| Drilled Hole Diameter | 0.062 |
| Hole Configuration Style | Configuration b |
| Hole Type And Quantity | 2 drilled |
| Material | Aluminum |
| Material Specification | Ams 4120 assn std single material response |
| Nut Height | 0.349 inches minimum and 0.369 inches maximum |
| Nut Style | Hexagon |
| Surface Treatment | Anodize |
| Surface Treatment Specification | Ams 2470 assn std single treatment response |
| Thread Class | 3b |
| Thread Direction | Right-hand |
| Thread Qty | 14 |
| Thread Qty Per Inch (tpi) | 14 |
| Thread Series | UNF |
| Thread Size | 0.875 |
| Width Across Flats | 1.114 inches minimum and 1.127 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error