rivets › blind rivets
MS90353U0608
Blind Fastener
Description
Blind Fastener
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.678 inches maximum |
| Grip Length | 0.469 inches minimum and 0.532 inches maximum |
| Hardness Rating | 326.0 knoop minimum sleeve and 466.0 knoop maximum sleeve, 48.0 rockwell c minimum stem and 53.0 rockwell c maximum stem |
| Head Major Diameter | 0.386 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Head Type | Flush |
| Industry Standards/Certification | MS90353 |
| Material | Steel |
| Material Specification | Mil-s-6049 mil spec single material response stem or qq-w-405 fed spec single material response stem, Qq-w-405 fed spec 1st material response sleeve or qq-w-405 fed spec 2nd material response sleeve or mil-s-6758 mil spec 3rd material response sleeve |
| Min. Tensile Strength (psi) | 112000 pounds per square inch |
| NIIN | 01-187-6216 |
| NSN | 5320-01-187-6216 |
| Shank Diameter | 0.197 inches minimum and 0.199 inches maximum |
| Shank Style | Self-plugging mechanically locked stem |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 1 cl 3 fed spec single treatment response stem, Qq-p-416 ty 2 cl 2 fed spec single treatment response sleeve |
| Weight | 0.01 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS21140-0608 MS 11/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error