screws › machine screws
MS51960-28
Flat Countersunk Head Machine Screw
Description
Fastener Length: 7/32", Thread: 6-40, Thread Length: 13/64"
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Fastener Length | 0.219 inches minimum and 0.250 inches maximum |
| Finish | Passivate per QQ-P-35 |
| Head Diameter | 0.244 inches minimum and 0.279 inches maximum |
| Head Style | Flat countersunk, Phillips Flat Head |
| Internal Drive Style | Cross recess type 1 |
| Length | 1/4 |
| Material | CRES |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Size | 6-40 |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Fraction | 6-40 |
| Thread Length | 0.200 inches minimum and 0.250 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNF |
| Thread Size | 6 |
| Thread Type | N.F. - Fine, UNC-2A |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35191-235 MS #6-40 · 1/4 in · Flat countersunk, Phillips Flat Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error