screws › machine screws
MS51959-26
6-32X1/4 MS51959 NASM51959 Phil Flat Machine Screw Full Thread 300 Series S/S DFAR
Description
Fastener Length: 1/4", Thread: 6-32, Thread Length: 5/32
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Diameter | #6 |
| Drive | Phillips |
| Drive Type | Phillips |
| Fastener Length | 0.219 inches minimum and 0.250 inches maximum |
| Finish | Passivate per QQ-P-35, Plain |
| Full Size | #6-32 x 1/4 |
| Head Diameter | 0.244 inches minimum and 0.279 inches maximum |
| Head Style | 82 Degree Flat Head, Flat countersunk, Phillips Flat Head |
| Head Type | Flat |
| Internal Drive Style | Cross recess type 1 |
| Length | 1/4 |
| Material | CRES |
| Milspec Part | MS51959 |
| MilspecPart | MS51959 |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Nondefinitive Specification/Std Data | 3 type and 2c style |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Size | 6-32 |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Fraction | 6-32 |
| Thread Length | 0.080 inches minimum and 0.167 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 6 |
| Thread Type | N.C. - Coarse, UNC-2A |
| Threads Per Inch | 32 |
| U.O.M. | Imperial |
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS51959-26. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error