washers › lock washers
MS35338-162
1/2 Military Split Lock Washer DFAR 400 Stainless Steel Hardened and Passsivated, MS35338-162
Description
MS 35338-162 Split Helical Lock Washer - Medium Series
Specifications
| Diameter | 1/2 |
|---|---|
| End Application | Ram ex43;ground power generator system (gpgs) b-52 aircraft;guided missile system f101-ge-102 (b-1);supply class aoe;support equipment aircraft b-1 aircraft;engine tomahawk;support equipment t-39;missile aircraft wasp class lhd |
| Full Size | 1/2 |
| Hardness Rating | Between 45.0 rockwell c and 53.0 rockwell c |
| Hole Diameter | Between 0.509 inches and 0.523 inches |
| Material | CRES |
| Material Specification | 66 federal standard single material response |
| Material Thickness | 0.125 |
| Max. Thickness | .135 |
| Maximum I.D. | .523 |
| Maximum O.D. | .873 |
| Military Spec | MS35338 |
| Min. Thickness | .125 |
| Min. Width | .171 |
| Minimum I.D. | .509 |
| Outside Diameter | 0.873 |
| Screw Size | 1/2 |
| Size | 1/2 |
| Style Designator | Split helical-right hand |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| U.O.M. | Imperial |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS51415-9 MS 1/2 · 7/8 in · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error