washers › lock washers
MS35336-55
External Tooth Lock Washer - 82° Countersunk
Description
Hole Diameter: "
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Departure From Cited Designator | As mod by material |
| Hole Diameter | 0.115 inches minimum and 0.123 inches maximum |
| Material | Bronze |
| Material Specification | Qq-b-750,comp a,temper hard fed spec single material response |
| Material Thickness | 0.015 inches minimum and 0.019 inches maximum |
| Max. Thickness | .019 |
| Maximum I.D. | .123 |
| Maximum O.D. | Approx |
| Min. Thickness | .015 |
| Minimum I.D. | .113 |
| Minimum O.D. | .213 |
| Outside Diameter | 0.213 |
| Screw Size | 4 |
| Style Designator | Countersink external teeth |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error