washers › lock washers
MS35333-77
Internal Tooth Lock Washer - Regular Series
Description
Hole Diameter: 1/2", MS35333 series washer
Specifications
| Hardness Rating | Between 40.0 rockwell c and 50.0 rockwell c |
|---|---|
| Hole Diameter | Between 0.448 inches and 0.464 inches |
| Material | CRES |
| Material Specification | 66 federal standard single material response |
| Material Thickness | Between 0.032 inches and 0.040 inches |
| Max. Thickness | .040 |
| Maximum I.D. | .464 |
| Maximum O.D. | .789 |
| Min. Thickness | .032 |
| Minimum I.D. | .448 |
| Minimum O.D. | .740 |
| Nondefinitive Specification/Std Data | 1 type and a grade and 1 style and 2 composition |
| Outside Diameter | Between 0.740 inches and 0.789 inches |
| Screw Size | 7/16 |
| Style Designator | Flat internal teeth |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Type 3 federal specification single treatment response type 2 federal specification single treatment response or qq-p-35 qq-p-35 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35333-43 MS 7/16 · 25/32 in · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error