washers › lock washers
MS35333-46
Internal Tooth Lock Washer - Regular Series
Description
Hole Diameter: 5/8", Cadmium
Specifications
| End Application | Carrier based asw 115ft;helicopter utility fire/crash p15;landing craft fire/crash p19;truck firefinder (an/tpq-;armored security vehicle;truck gairborne mobile dir air spt ct;fire pumps;radar set |
|---|---|
| Finish | Cadmium ll |
| Hardness Rating | Between 40.0 rockwell c and 50.0 rockwell c |
| Hole Diameter | Between 0.640 inches and 0.663 inches |
| Material | Steel |
| Material Specification | 66 federal standard all material responses |
| Material Thickness | Between 0.042 inches and 0.050 inches |
| Max. Thickness | .050 |
| Maximum I.D. | .663 |
| Maximum O.D. | 1.073 |
| Min. Thickness | .042 |
| Minimum I.D. | .640 |
| Minimum O.D. | 1.045 |
| Nondefinitive Specification/Std Data | 1 type and a grade and 1 style and 1 composition |
| Outside Diameter | Between 1.045 inches and 1.071 inches |
| Screw Size | 5/8 |
| Style Designator | Flat internal teeth |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Cl 3 federal specification single treatment response type 2 qq-p-416 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35333-80 MS 5/8 · 1-1/16 in · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error