washers › lock washers
MS35333-146
Internal Tooth Lock Washer - Regular Series
Description
Hole Diameter: 1/2"
Specifications
| Hardness Rating | 85.0 rockwell b minimum and 95.0 rockwell b maximum |
|---|---|
| Hole Diameter | 0.472 inches minimum and 0.480 inches maximum |
| Material | Bronze |
| Material Specification | Qq-b-750 fed spec 1st material response |
| Material Thickness | 0.013 inches minimum and 0.023 inches maximum |
| Max. Thickness | .023 |
| Maximum I.D. | .480 |
| Maximum O.D. | .607 |
| Min. Thickness | .013 |
| Minimum I.D. | .472 |
| Minimum O.D. | .593 |
| Nondefinitive Specification/Std Data | 1 type and a grade and 3 composition or 4 composition |
| Outside Diameter | 0.593 inches minimum and 0.607 inches maximum |
| Screw Size | 15/32 |
| Style Designator | Flat internal teeth |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35333-136 MS 7/16 · 0.607 in · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error