washers › lock washers
MS35333-135
Internal Tooth Lock Washer - Regular Series
Description
Hole Diameter: 1/4", internal teeth, MS35333 series washer
Specifications
| Hardness Rating | 40.0 rockwell c minimum and 50.0 rockwell c maximum |
|---|---|
| Hole Diameter | 0.256 inches minimum and 0.267 inches maximum |
| Material | CRES |
| Material Thickness | 0.016 inches minimum and 0.020 inches maximum |
| Max. Thickness | .020 |
| Maximum I.D. | .267 |
| Maximum O.D. | .410 |
| Min. Thickness | .016 |
| Minimum I.D. | .256 |
| Minimum O.D. | .395 |
| Nondefinitive Specification/Std Data | 3 type and 2 composition |
| Outside Diameter | 0.395 inches minimum and 0.410 inches maximum |
| Screw Size | 1/4 |
| Style Designator | Flat internal teeth |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35,type 2 fed spec single treatment response or qq-p-35,type 3 fed spec single treatment response |
| Weight | .15 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35333-125 MS 1/4 · 13/32 in · Steel
- MS35333-167 MS 1/4 · 13/32 in · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error