screws › machine screws
MS35277-52
Drilled Fillister Head Machine Screw
Description
Fastener Length: 1-3/4", Hole Diameter: 1/32", Thread: 8-32, Thread Length: 1-3/4"
Specifications
| Fastener Length | 1.750 |
|---|---|
| Finish | Anodize |
| Head Diameter | 0.250 inches minimum and 0.270 inches maximum |
| Head Height | 0.106 inches minimum and 0.113 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 1 3/4 |
| Material | Aluminum |
| Min. Tensile Strength (psi) | 62000 pounds per square inch |
| Screw Material | Aluminum alloy 2024 |
| Screw Material Specification | Qq-a-225/6 fed spec single material response |
| Screw Surface Treatment | Oxide film |
| Screw Surface Treatment Specification | Mil-c-5541 mil spec single treatment response |
| Size | 8-32 |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 1.688 inches minimum and 1.750 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 8 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-52 MS #8-32 · 0.073 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error