screws › machine screws
MS35276-265
10-32X3/4 MS35276 Military Drilled Fillister MS Screw Fine Thread 300 Series S/S DFAR
Description
Fastener Length: 3/4", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 3/4", MS35276 series screw
Specifications
| Diameter | #10 |
|---|---|
| Drive | Slotted |
| Fastener Length | 0.750 |
| Finish | Passivate, Plain |
| Full Size | #10-32 x 3/4 |
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 3/4 |
| Material | CRES |
| MilspecPart | MS35276 |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 federal standard all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.688 inches and 0.750 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Thread Type | N.F. - Fine, UNF |
| Threads Per Inch | 32 |
| U.O.M. | Imperial |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35266-65 MS #10-32 · 3/4 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error