screws › machine screws
MS35276-264
Drilled Fillister Head Machine Screw
Description
Fastener Length: 5/8", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 5/8
Specifications
| Country of Origin | USA |
|---|---|
| Fastener Length | 0.625 |
| Finish | Passivate |
| Head Angle | 100 ? |
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | AN507 |
| Internal Drive Style | Slot |
| Length | 5/8 |
| Material | CRES |
| Material Specification | 66 federal standard all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Size | 10-32 |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.563 inches and 0.625 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Thread Type | N.F. - Fine |
| Weight | 0.0065 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35266-64 MS #10-32 · 5/8 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error