screws › machine screws
MS35275-263
Drilled Fillister Head Machine Screw
Description
Fastener Length: 1/2", Hole Diameter: 3/64", Thread: 10-24, Thread Length: 27/64", MS35275 series screw
Specifications
| Alternate Part Number | AN500AD10-8 |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.500 |
| Finish | Passivate |
| Head Angle | 100 ? |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | AN507 |
| Internal Drive Style | Slot |
| Length | 1/2 |
| Material | CRES |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Size | 10-24 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.417 inches minimum and 0.500 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNC |
| Thread Size | 10 |
| Thread Type | N.C. - Coarse |
| Weight | .005 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-63 MS #10-24 · 1/2 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error