screws › machine screws
MS35275-247
8-32X3/4 MS35275 Military Drilled Fillister MS Screw Coarse Thrd 300 Series S/S DFAR
Description
MS 35275-247 Drilled Fillister Head Machine Screw
Specifications
| Alternate Part Number | AN500AD8-12 |
|---|---|
| Country of Origin | USA |
| Diameter | #8 |
| Drive | Slotted |
| Fastener Length | 0.750 |
| Finish | Passivate, Plain |
| Full Size | #8-32 x 3/4 |
| Head Angle | 100 ? |
| Head Diameter | 0.250 inches minimum and 0.270 inches maximum |
| Head Height | 0.106 inches minimum and 0.113 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | AN507 |
| Internal Drive Style | Slot |
| Length | 3/4 |
| Material | CRES |
| MilspecPart | MS35275 |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| NIIN | 00-939-9208 |
| NSN | 5305-00-939-9208 |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Size | 8-32 |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | 0.688 inches minimum and 0.750 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNC |
| Thread Size | 8 |
| Thread Type | N.C. - Coarse, UNC |
| Threads Per Inch | 32 |
| U.O.M. | Imperial |
| Weight | .005 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-47 MS #8-32 · 3/4 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error