screws › machine screws
MS35275-241
8-32X1/4 MS35275 Military Drilled Fillister MS Screw Coarse Thrd 300 Series S/S DFAR
Description
Fastener Length: 1/4", Hole Diameter: 1/32", Thread: 8-32, Thread Length: 1/4
Specifications
| Diameter | #8 |
|---|---|
| Drive | Slotted |
| Fastener Length | Between 0.219 inches and 0.250 inches |
| Finish | Passivate, Plain |
| Full Size | #8-32 x 1/4 |
| Head Diameter | Between 0.250 inches and 0.270 inches |
| Head Height | Between 0.106 inches and 0.113 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 1/4 |
| Material | CRES |
| Material Specification | 66 federal standard all material responses |
| MilspecPart | MS35275 |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Size | 8-32 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.188 inches and 0.250 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 8 |
| Thread Type | N.C. - Coarse, UNC |
| Threads Per Inch | 32 |
| U.O.M. | Imperial |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-41 MS #8-32 · 1/4 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error