screws › machine screws
MS35275-208
Drilled Fillister Head Machine Screw
Description
Fastener Length: 5/8", Hole Diameter: ", Thread: 2-56, Thread Length: 5/8"
Specifications
| Fastener Length | 0.625 |
|---|---|
| Finish | Passivate |
| Head Diameter | 0.124 inches minimum and 0.140 inches maximum |
| Head Height | 0.055 inches minimum and 0.062 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.031 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 5/8 |
| Material | CRES |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Size | 2-56 |
| Thread Class | 2a |
| Thread Diameter | 0.086 |
| Thread Direction | Right-hand |
| Thread Length | 0.625 inches minimum |
| Thread Qty | 56 |
| Thread Qty Per Inch (tpi) | 56 |
| Thread Series Designator | UNC |
| Thread Size | 2 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35265-8 MS #2-56 · 5/8 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error