screws › machine screws
MS35274-63
Drilled Fillister Head Machine Screw
Description
Fastener Length: 1/2", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 1/2", MS35274 series screw
Specifications
| Fastener Length | 0.500 |
|---|---|
| Finish | Black Oxide |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 1/2 |
| Material | Brass |
| Min. Tensile Strength (psi) | 57000 pounds per square inch |
| Screw Material | Copper alloy |
| Screw Material Specification | Qq-b-626 fed spec single material response or qq-w-321 fed spec single material response |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.438 inches minimum and 0.500 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
| Thread Type | N.F. - Fine |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35266-63 MS #10-32 · 1/2 in · Drilled Fillister Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error