screws › machine screws
MS35273-14
Drilled Fillister Head Machine Screw
Description
Fastener Length: 5/16", Hole Diameter: 1/32", Thread: 4-40, Thread Length: 5/16"
Specifications
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
|---|---|
| Finish | Black Oxide |
| Head Diameter | 0.166 inches minimum and 0.183 inches maximum |
| Head Height | 0.072 inches minimum and 0.079 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.037 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 5/16 |
| Material | Brass |
| Min. Tensile Strength (psi) | 57000 pounds per square inch |
| Screw Material | Copper alloy |
| Screw Material Specification | Qq-b-626 fed spec single material response or qq-w-321 fed spec single material response |
| Size | 4-40 |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | 0.262 inches minimum and 0.312 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNC |
| Thread Size | 4 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35275-214 MS #4-40 · 5/16 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error