screws › machine screws
MS35266-70
Drilled Fillister Head Machine Screw
Description
Fastener Length: 1-3/4", Hole Diameter: 1/32", Thread: 10-32, Thread Length: 1-3/4", drilled head
Specifications
| Fastener Length | 1.75 |
|---|---|
| Finish | Cadmium ll |
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Cross recess type 1 |
| Length | 1 3/4 |
| Material | Steel |
| Material Specification | Qq-s-633 federal specification single material response |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Size | 10-32 |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Class 3 federal specification all treatment responses type 2 qq-p-416 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 1.688 inches and 1.750 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Thread Type | N.F. - Fine |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35276-270 MS #10-32 · 0.073 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error