screws › machine screws
MS35266-67
10-32X1 MS35266 Military Drilled Slotted Fillister MS Screw Fine Thread
Description
MS 35266-67 Drilled Fillister Head Machine Screw
Specifications
| Alternate Part Number | AN501A10-16 |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Drive | Slotted |
| Drive Style | Slotted |
| Fastener Length | 1.000 |
| Finish | Cadmium Plate, Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | MS35266 |
| Internal Drive Style | Cross recess type 1 |
| Length | 1 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-622-9485 |
| NSN | 5305-00-622-9485 |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 fed spec single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec single treatment response |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.938 inches minimum and 1.000 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10-32 |
| Thread Type | N.F. - Fine |
| Weight | 0.01 lb |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS35266-67 — functionally equivalent.
- AN501-A10-16 Listed alternate #10
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35276-267 MS #10-32 · 0.073 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error