screws › machine screws
MS35266-60
10-32X5/16 MS35266 Military Drilled Slotted Fillister MS Screw Fine Thread
Description
MS 35266-60 Drilled Fillister Head Machine Screw
Specifications
| Country of Origin | USA |
|---|---|
| Drilling | Drilled Head |
| Drive | Slotted |
| Drive Style | Cross, Slotted |
| Fastener Length | Between 0.281 inches and 0.312 inches |
| Finish | Cadmium Plate, Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | Between 0.292 inches and 0.313 inches |
| Head Height | Between 0.123 inches and 0.130 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | MS35266 |
| Internal Drive Style | Cross recess type 1 |
| Length | 5/16 |
| Material | Steel |
| Material Specification | Qq-s-633 federal specification single material response |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-720-8429 |
| NSN | 5305-00-720-8429 |
| Pre-Packaged Bag Quantity | 100 |
| Size | 10-32 |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.250 inches and 0.312 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10-32 |
| Thread Type | N.F. - Fine |
| Weight | 0.003 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35276-260 MS #10-32 · 5/16 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error