screws › machine screws
MS35266-59
Drilled Fillister Head Machine Screw
Description
Length: 1/4", thread: 10-32, fillister head machine screw, cadmium plated carbon steel, fine thread
Specifications
| Country of Origin | USA |
|---|---|
| Departure From Cited Designator | As modified by tensile strength |
| Drilling | Drilled Head |
| Drive Style | Slotted |
| Fastener Length | 0.250 |
| Finish | Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | MS35266 |
| Internal Drive Style | Slot |
| Length | 1/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-055-5769 |
| NSN | 5305-00-055-5769 |
| Nondefinitive Specification/Std Data | 1 type or 5s style |
| Pre-Packaged Bag Quantity | 100 |
| Screw Material | Steel |
| Screw Surface Treatment | Cadmium and chromate |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.250 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10-32 |
| Thread Type | N.F. - Fine |
| Weight | 0.0025 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35276-259 MS #10-32 · 1/4 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error