screws › machine screws
MS35265-79
Drilled Fillister Head Machine Screw
Description
MS 35265-79 Drilled Fillister Head Machine Screw
Specifications
| Alternate Part Number | AN500A416-8 |
|---|---|
| Country of Origin | USA |
| Fastener Length | 0.500 |
| Finish | Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | Between 0.389 inches and 0.414 inches |
| Head Height | Between 0.219 inches and 0.237 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.062 |
| Hole Quantity | 1 |
| Industry Standards/Certification | AN507 |
| Internal Drive Style | Slot |
| Length | 1/2 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-543-4302 |
| NSN | 5305-00-543-4302 |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 federal specification single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| Size | 1/4-20 |
| Thread Class | 2a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.400 inches and 0.500 inches |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 1/4 |
| Thread Type | N.C. - Coarse |
| Weight | 0.01 lb |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS35265-79 — functionally equivalent.
- AN500-A416-8 Listed alternate 1/4 in
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error