screws › machine screws
MS35265-60
Drilled Fillister Head Machine Screw
Description
MS 35265-60 Drilled Fillister Head Machine Screw
Specifications
| Alternate Part Number | AN500A10-5 |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Drive Style | Slotted |
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
| Finish | Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | 0.292 inches minimum and 0.313 inches maximum |
| Head Height | 0.123 inches minimum and 0.130 inches maximum |
| Head Hole Configuration Style | Hexagon flats |
| Head Style | Drilled Fillister Head |
| Head Type | Fillister |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Industry Standards/Certification | MS35265 |
| Internal Drive Style | Slot |
| Length | 5/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-846-6582 |
| NSN | 5305-00-846-6582 |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 fed spec single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec all treatment responses |
| Size | 10-24 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.229 inches minimum and 0.312 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNC |
| Thread Size | 10-24 |
| Thread Type | N.C. - Coarse |
| Weight | .005 lb |
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS35265-60. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error