screws › machine screws
MS35265-53
Drilled Fillister Head Machine Screw
Description
MS 35265-53 Drilled Fillister Head Machine Screw
Specifications
| Fastener Length | 2.000 |
|---|---|
| Finish | Cadmium ll |
| Head Diameter | Between 0.250 inches and 0.270 inches |
| Head Height | Between 0.106 inches and 0.113 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.046 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 2 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 federal specification single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Ty2 cl3 federal specification single treatment response qq-p-416 |
| Size | 8-32 |
| Thread Class | 2a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | Between 1.938 inches and 2.000 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 8 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35273-53 MS #8-32 · 0.086 in · Drilled Fillister Head · Brass
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error