screws › machine screws
MS35265-18
Drilled Fillister Head Machine Screw
Description
Fastener Length: 5/8", Hole Diameter: 1/32", Thread: 4-40, Thread Length: 5/8
Specifications
| Fastener Length | 0.625 |
|---|---|
| Finish | Cadmium ll |
| Head Diameter | Between 0.166 inches and 0.183 inches |
| Head Height | Between 0.072 inches and 0.079 inches |
| Head Hole Configuration Style | Round |
| Head Style | Drilled Fillister Head |
| Hole Diameter | 0.037 |
| Hole Quantity | 1 |
| Internal Drive Style | Slot |
| Length | 5/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel |
| Screw Material Specification | Qq-s-633 federal specification single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| Size | 4-40 |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.575 inches and 0.625 inches |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 4 |
| Thread Type | N.C. - Coarse |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35275-218 MS #4-40 · 5/8 in · Drilled Fillister Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error