screws › machine screws
MS35207-266
10-32X7/8 MS35207 Military Phillips Pan Full Thread Machine Screw Cadmium II
Description
MS 35207-266 Phillips Pan Head Machine Screw
Specifications
| Alternate Part Number | AN520-1032R14 AN521-10R14 |
|---|---|
| Country of Origin | USA |
| Dia. & Thread Size | 10-32 |
| Drive | Phillips |
| Fastener Length | 0.875 |
| Finish | Cadmium Yellow, Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | Between 0.357 inches and 0.373 inches |
| Head Height | Between 0.122 inches and 0.133 inches |
| Head Style | Phillips Pan Head |
| Head Type | Pan |
| Industry Standards/Certification | MS35207 |
| Internal Drive Style | Cross recess type 1 |
| Length | 7/8 |
| Length (in.) | 7/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| NIIN | 00-995-3444 |
| NSN | 5305-00-995-3444 |
| Old AN520R Dash No. | -10R14 |
| Screw Material | Steel comp 1010 or steel comp 1011 or steel comp 1013 |
| Screw Material Specification | Astm a575 assn standard single material response or astm a576 assn standard single material response or astm a108 assn standard single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Cl 3 federal specification single treatment response type 2 qq-p-416 |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.813 inches and 0.875 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10-32 |
| Thread Type | Fine Thread, N.F. - Fine |
| Weight | 0.0085 lb |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS35207-266 — functionally equivalent.
- AN526-1032R14 Same NSN #10-32 · 7/8 in · Pan Head · Steel
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35215-58 MS #10-32 · 7/8 in · Phillips Pan Head · Brass
- MS35219-58 MS #10-32 · 7/8 in · Phillips Pan Head · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error