screws › machine screws
MS35206-229
6-32X7/16 MS35206 Military Phillips Pan Full Thread Machine Screw Cadmium II
Description
MS 35206-229 Phillips Pan Head Machine Screw
Specifications
| Alternate Part Number | AN515-632R7 AN515-6R7 |
|---|---|
| Country of Origin | USA |
| Criticality Code Justification | Feat |
| Dia. & Thread Size | 6-32 |
| Fastener Length | 0.438 |
| Finish | Cadmium ll |
| Head Angle | 100 ? |
| Head Diameter | Between 0.256 inches and 0.270 inches |
| Head Height | Between 0.087 inches and 0.097 inches |
| Head Style | Phillips Pan Head |
| Head Type | Pan |
| Industry Standards/Certification | MS35206 |
| Internal Drive Style | Cross recess type 1 |
| Length | 7/16 |
| Length (in.) | 7/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 60000 pounds per square inch |
| NIIN | 00-984-4989 |
| NSN | 5305-00-984-4989 |
| Old AN515R Dash No. | -6R7 |
| Screw Material | Steel comp 1010 or steel comp 1011 or steel comp 1013 |
| Screw Material Specification | 66 federal standard all material responses |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416 type 2 cl 3 federal specification single treatment response |
| Size | 6-32 |
| Special Features | Flight safety critical aircraft part |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.376 inches and 0.438 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 6-32 |
| Thread Type | Coarse Thread, N.C. - Coarse |
| Weight | 0.0024 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35214-26 MS #6-32 · 7/16 in · Phillips Pan Head · Brass
- MS35218-26 MS #6-32 · 7/16 in · Phillips Pan Head · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error