screws › machine screws
MS35191-236
Military Standard Machine Screw
Description
Fastener Length: 5/16", Thread: 6-40, Thread Length: 5/16", MS35191 series screw
Specifications
| Countersink Angle | 80.0 degrees minimum and 82.0 degrees maximum |
|---|---|
| Fastener Length | 0.281 inches minimum and 0.312 inches maximum |
| Finish | Cadmium ll |
| Head Diameter | 0.244 inches minimum and 0.279 inches maximum |
| Head Style | Flat countersunk, Phillips Flat Head |
| Internal Drive Style | Cross recess type 1 |
| Length | 5/16 |
| Material | Steel |
| Min. Tensile Strength (psi) | 55000 pounds per square inch |
| Screw Material | Steel comp 1010 or steel comp 1011 or steel comp 1013 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Size | 6-40 |
| Thread Class | 2a |
| Thread Diameter | 0.138 |
| Thread Direction | Right-hand |
| Thread Length | 0.262 inches minimum and 0.312 inches maximum |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series Designator | UNF |
| Thread Size | 6 |
| Thread Type | N.F. - Fine |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS51960-29 MS #6-40 · 5/16 in · Flat countersunk, Phillips Flat Head · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error