screws › machine screws
MS35190-223
4-40x3/8 MS35190 Military Phillips Flat 82 Degree Full Thread Machine Screw Cadmium
Description
MS 35190-223 Phillips Flat Head Machine Screw - 82 Degree
Specifications
| Alternate Part Number | Possible AN505-440R6 |
|---|---|
| Countersink Angle | Between 80.0 degrees and 82.0 degrees |
| Country of Origin | USA |
| Fastener Length | 0.375 |
| Finish | Cadmium ll |
| Head Angle | 82 º |
| Head Diameter | Between 0.195 inches and 0.225 inches |
| Head Style | Flat countersunk, Phillips Flat Head |
| Head Type | Flat |
| Industry Standards/Certification | MS35190 |
| Internal Drive Style | Cross recess type 1 |
| Length | 0.375 in, 3/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 60000 pounds per square inch |
| Minimum Tensile Strength | 60000 ksi |
| NIIN | 00-957-6636 |
| NSN | 5305-00-957-6636 |
| Nondefinitive Specification/Std Data | 3 type and 2c style |
| Screw Material | Steel |
| Screw Material Specification | 66 federal standard single material response or astma108 assn standard single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Type 2 class 3 military specification single treatment response type 2 class 3 federal specification single treatment response or mil-c-81562 qq-p-416 |
| Size | 4-40 |
| Thread Class | 2a |
| Thread Diameter | 0.112 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.294 inches and 0.375 inches |
| Thread Qty | 40 |
| Thread Qty Per Inch (tpi) | 40 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 4-40 |
| Thread Type | N.C. - Coarse |
| Weight | 0.0002 lb |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS35198-14 MS #4-40 · 3/8 in · Flat countersunk, Phillips Flat Head · Brass
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error