clamps › loop clamps
MS25281R14
Clamp
Description
Clamp
Specifications
| Center To Center Distance Between Loop And Mounting Hole | Between 0.853 inches and 0.903 inches |
|---|---|
| Departure From Cited Designator | As mod by material which must conform to ships parts control center special quality control provisions |
| Diameter | Between 0.198 inches and 0.213 inches |
| Distance From Loop Center To Tongue End | Between 1.093 inches and 1.233 inches |
| Loop Inside Diameter | Between 0.855 inches and 0.895 inches |
| Material | Plastic |
| Material Specification | Astm d4066 assn standard single material response |
| Material Thickness | Between 0.050 inches and 0.085 inches |
| NIIN | 01-014-0087 |
| NSN | 5340-01-014-0087 |
| Overall Width | Between 0.495 inches and 0.610 inches |
| Style Designator | Single loop |
| Test Data Document | Etc.). |
| Tongue Hole Type | Unthreaded round |
| Weight | 0.01 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS25281R14. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error