screws › machine screws
MS24694S96
1/4-28 X 19/32 Cadmium FP Struct Ms
Description
These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,000 PSI. Minimum tensile strength for stainless steel is 85,000 PSI
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Fastener Length | Between 0.578 inches and 0.625 inches |
| Hardness Rating | Between 26.0 rockwell c and 32.0 rockwell c |
| Head Diameter | Between 0.447 inches and 0.507 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 5/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Screw Material | Steel comp 8630 or steel comp 4037 |
| Screw Material Specification | Mil-s-6050 military specification 1st material response or ams 6300 assn standard 2nd material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Type 2 cl 3 federal specification all treatment responses qq-p-416 |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.335 inches and 0.484 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 1/4 |
| Type | Cad Plated |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24694C96 MS 1/4-28 · 5/8 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error