screws › machine screws
MS24694S75
Military Standard Machine Screw
Description
length: 2-3/32", grip: 1-5/8", thread: 10-32, countersunk, flat head, cadmium plated steel, structural, MS24694 series screw
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Fastener Length | Between 2.078 inches and 2.125 inches |
| Hardness Rating | Between 26.0 rockwell c and 32.0 rockwell c |
| Head Diameter | Between 0.327 inches and 0.385 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 2 1/8 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Screw Material | Steel comp 8740 or steel comp 8630 |
| Screw Material Specification | Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Class 3 federal specification single treatment response type 2 qq-p-416 |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.376 inches and 0.516 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24694S74 MS #10-32 · 0.086 in · Flat countersunk · Steel
- MS24694S84 MS #10-32 · 0.086 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error