screws › machine screws
MS24694C7
Stainless Steel Csk Machine Screw
Description
These structural screws have a 100° countersunk head. Cadmium plated per QQ-P-416A, Type II, Class 3. Minimum tensile strength for steel is 125,000 PSI. Minimum tensile strength for stainless steel is 85,000 PSI
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Fastener Length | Between 0.641 inches and 0.688 inches |
| Head Diameter | Between 0.283 inches and 0.332 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Material | Steel |
| Min. Tensile Strength (psi) | 85000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 304 |
| Screw Material Specification | 66 federal standard all material responses |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 federal specification single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.164 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.345 inches and 0.485 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNC |
| Thread Series Designator | Unc (coarse thread) |
| Thread Size | 8 |
| Type | Stainless Steel |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24694A7 MS #8-32 · 11/16 in · Flat countersunk · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error