screws › machine screws
MS24694-S207
Military Standard Machine Screw
Description
Machine Screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 2.016 inches minimum and 2.062 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Diameter | 0.686 inches minimum and 0.762 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Screw Material | Steel comp 8740 or steel comp 8630 |
| Screw Material Specification | Mil-s-6049 mil spec 1st material response or mil-s-6050 mil spec 2nd material response |
| Screw Surface Treatment | Cadmium |
| Screw Surface Treatment Specification | Qq-p-416 type 2 class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 0.573 inches minimum and 0.734 inches maximum |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS24694-S207. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error