screws › machine screws
MS24693C295
Stainless Steel Machine Screw
Description
These non-structural screws have a flat countersunk head, 100° cross recessed head. (-C #'s) Cleaned and descaled, corrosion restistant steel (-S #'s) Cadmium plated carbon steel (-BB #'s) Black chemical finish brass
Specifications
| Countersink Angle | Between 99.0 degrees and 101.0 degrees |
|---|---|
| Drive Style | Cross |
| Fastener Length | 0.625 |
| Head Diameter | Between 0.442 inches and 0.507 inches |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 5/8 |
| Material | CRES |
| Material Specification | 66 federal standard all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Surface Treatment | Passivate |
| Thread | 1/4-28 |
| Thread Class | 2a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.554 inches and 0.625 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 1/4 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102-4-10 NAS 1/4-28 · 5/8 in · Flat countersunk · Steel
- NAS1189-4T10L NAS 1/4-28 · 5/8 in · Flat countersunk · Steel
- NAS5704U10 NAS 1/4-28 · 5/8 in · Flat countersunk · Iron
- MS24693-S295 MS 1/4-28 · 5/8 in · Flat countersunk · Steel
- MS24693S295 MS 1/4-28 · 5/8 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error