screws › machine screws
MS24693-S276
10-32X1 MS24693 Military Phillips Flat 100 Degree Full Thread Machine Screw Cadmium
Description
Machine Screw - MS24693S276
Specifications
| Alternate Part Number | AN507-1032R16 |
|---|---|
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
| Country of Origin | USA |
| Drive | Phillips |
| Fastener Length | 1.000 |
| Finish | Cadmium Yellow |
| Head Angle | 100 ? |
| Head Diameter | 0.333 inches minimum and 0.385 inches maximum |
| Head Style | 100 Degree Flat Head, Flat countersunk |
| Industry Standards/Certification | AN507 |
| Internal Drive Style | Cross recess type 1 |
| Material | Steel |
| Min. Tensile Strength (psi) | 60 pounds per square inch |
| Screw Material | Steel comp 1010 |
| Screw Material Specification | 66 fed std single material response |
| Screw Surface Treatment | Cadmium and chromate |
| Screw Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Size | 10-32 |
| Thread Class | 2a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.938 inches minimum and 1.000 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
| Weight | 0.0068 lb |
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS24693-S276 — functionally equivalent.
- AN507-1032R16 Listed alternate #10 · 0.073 in · Steel
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24693-C276 MS #10-32 · 0.073 in · 100 Degree Flat Head, Flat countersunk · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error