screws › machine screws
MS24693-C342
Military Standard Machine Screw
Description
Machine Screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.969 inches minimum and 1.000 inches maximum |
| Head Diameter | 0.670 inches minimum and 0.762 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel corrosion resisting or steel |
| Screw Material Specification | Qq-s-763,300 series fed spec 1st material response or 66,300 series fed std 1st material response or comp 16-18 or 18-8 assn std 2nd material response |
| Screw Surface Treatment | Passivate |
| Screw Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 2a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 0.721 inches minimum and 0.835 inches maximum |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1102E6-16 NAS 1 in · Flat countersunk
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error