screws › machine screws
MS24693-C102
1/4-20 x 1 1/2 MS24693-C Phillips Flat 100 Degree F/T Machine Screw 300 Series S/S DFAR
Description
Machine Screw
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Drive | Phillips |
| Fastener Length | 1.500 |
| Finish | Plain |
| Head Diameter | 0.442 inches minimum and 0.507 inches maximum |
| Head Style | 100 Degree Flat Head, Flat countersunk |
| Internal Drive Style | Cross recess type 1 |
| Length | 1 1/2 |
| Material | CRES |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Screw Material | Steel comp 302 or steel comp 303 or steel comp 304 |
| Screw Material Specification | 66 fed std all material responses |
| Screw Surface Treatment | Passivate |
| Size | 1/4-20 |
| Thread Class | 2a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 1.400 inches minimum and 1.500 inches maximum |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNC |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS24693-102B MS 0.073 in · 100 Degree Flat Head, Flat countersunk · CRES
- MS24693-C303 MS 0.073 in · 100 Degree Flat Head, Flat countersunk · CRES
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error