screws › socket head cap screws
MS24673-4
Hexagon Socket Drilled Cap Screw
Description
MS 24673-4 Hexagon Socket Drilled Cap Screw
Specifications
| Alternate Part Number | NAS1351-C3-12 |
|---|---|
| Country of Origin | USA |
| Drilling | Drilled Head |
| Fastener Length | 0.750 |
| Finish | Passivate |
| Hardness Rating | 80.0 rockwell b minimum |
| Head Angle | 100 ? |
| Head Diameter | 0.303 inches minimum and 0.312 inches maximum |
| Head Height | 0.185 inches minimum and 0.190 inches maximum |
| Head Style | Flat chamfer |
| Head Type | Socket |
| Hole Configuration Style | Round longitudinal hole |
| Hole Diameter | 0.047 |
| Hole Quantity | 6 |
| Hole Type | Drilled |
| Industry Standards/Certification | MS24673 |
| Internal Drive Style | Hexagon |
| Length | 3/4 |
| Material | CRES |
| Material Specification | 66 fed std all material responses |
| Min. Tensile Strength (psi) | 80000 pounds per square inch |
| Minimum Yield Strength | 30000 pounds per square inch |
| NIIN | 00-993-7198 |
| NSN | 5305-00-993-7198 |
| Size | 10-32 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.704 inches minimum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 0.1900-32, 10 |
| Thread Type | N.F. - Fine |
| Weight | .005 lb |
| Width Across Flats | 0.156 inches minimum and 0.159 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS24673-4 — functionally equivalent.
- NAS1351C3H12 Same NSN #10-32 · 3/4 in · Flat chamfer · CRES
- NAS1351C3-12 Listed alternate #10-32 · 3/4 in · Flat chamfer · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error