screws › socket head cap screws
MS24672-30
Hexagon Socket Flat Head Cap Screw
Description
Fastener Length: 1-31/64", Thread: 3/8-24, Head Width: 7/32", Thread Length: 1-1/64", MS24672 series screw
Specifications
| Countersink Angle | 80.0 degrees minimum and 84.0 degrees maximum |
|---|---|
| Fastener Length | 1.484 inches minimum and 1.531 inches maximum |
| Finish | Passivate |
| Hardness Rating | 80.0 rockwell b |
| Head Diameter | 0.720 inches minimum and 0.781 inches maximum |
| Head Style | Flat Head, Flat countersunk |
| Internal Drive Style | Hexagon |
| Length | 1 1/2, 1 17/32 |
| Material | CRES |
| Material Specification | 66 fed std single material response |
| Min. Tensile Strength (psi) | 70000 pounds per square inch |
| Nondefinitive Specification/Std Data | 4 type |
| Size | 3/8-24 |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.375 |
| Thread Direction | Right-hand |
| Thread Length | 1.000 inches minimum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 3/8 |
| Thread Type | N.F. - Fine |
| Width Across Flats | 0.218 inches minimum and 0.220 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS24672-30. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error