bolts › shear bolts
MS21296H07024
Military Standard Bolt
Description
Fastener Length: 2-11/32", Hole Diameter: ", Thread: 7/16-20, Thread Length: 53/64"
Specifications
| Extended Washer Diameter | 0.807 inches minimum and 0.817 inches maximum |
|---|---|
| Extended Washer Thickness | 0.053 inches minimum and 0.073 inches maximum |
| Fastener Length | 2.333 inches minimum and 2.363 inches maximum |
| Grip Diameter | 0.4360 inches minimum and 0.4370 inches maximum |
| Grip Length | 1.490 inches minimum and 1.510 inches maximum |
| Hardness Rating | 51.0 rockwell c minimum and 54.0 rockwell c maximum |
| Head Height | 0.310 inches minimum and 0.350 inches maximum |
| Head Style | Spline extended washer |
| Hole Configuration Style | Round longitudinal hole |
| Hole Diameter | 0.050 inches minimum and 0.060 inches maximum |
| Hole Quantity | 4 |
| Hole Type | Drilled |
| Length | 2 23/64 |
| Material | Steel |
| Material Specification | Ams 6487 assn std single material response |
| Min. Tensile Strength (psi) | 260000 pounds per square inch |
| Surface Finish | 32.0 microinches bearing surface of head, 32.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Mil-s-8837 ty 2 cl 2 mil spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.438 |
| Thread Direction | Right-hand |
| Thread Length | 0.823 inches minimum and 0.873 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNJF |
| Thread Size | 7/16 |
| Width Between Flats | 0.514 inches minimum and 0.521 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS21296H06024
- MS21296H06027
- MS21296H06028
- MS21296H07024
Cross-reference
No interchangeable or dimensionally similar parts are on record for MS21296H07024. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error