screws › machine screws
MS21207-10-6
3/8 Inch Length MS21207 100 Degree Flat Head Tapping Screw
Description
3/8 Inch Length MS21207 100 Degree Flat Head Tapping Screw
Specifications
| Alternate Part Number | NAS548P-10-6 |
|---|---|
| Countersink Angle | 100.0 degrees |
| Country of Origin | USA |
| Diameter | 10 |
| Fastener Length | 0.375 |
| Finish | Cadmium II Plated |
| Head Angle | 100 º |
| Head Diameter | 0.359 inches minimum and 0.385 inches maximum |
| Head Height | 0.063 inches minimum and 0.072 inches maximum |
| Head Style | Flat countersunk |
| Head Type | Flat |
| Industry Standards/Certification | MS21207 |
| Internal Drive Style | Cross recess type 1 |
| Length | 3/8 in |
| Material | Steel |
| Material Specification | Mil-s-6033 mil spec single material response |
| Nonmachine Thread Diameter | 0.190 |
| Nonmachine Thread Style | Dog type (type b or c) |
| Sold In | Per Package |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,ty2,cl2aasklc50 fed spec single treatment response |
| Thread Size | 10-6 |
| Weight | .005 lb |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS21207-10-6
- MS21207-10-16
Cross-reference
Interchangeable
Parts that share a National Stock Number or are listed as an alternate for MS21207-10-6 — functionally equivalent.
- NAS548P10-6 Listed alternate 3/8 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error