rivets › blind rivets
MS21140-0606
Military Standard Blind Rivet
Description
Blind Rivet part number MS21140-0606
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.553 inches maximum |
| Grip Length | 0.344 inches minimum and 0.407 inches maximum |
| Head Major Diameter | 0.387 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Lubrication | Dry film |
| Material | Iron |
| Material Specification | Ams 5737 assn std single material response |
| Min. Tensile Strength (psi) | 95000 pounds per square inch |
| Shank Diameter | 0.197 inches minimum and 0.199 inches maximum |
| Shank Style | Self-plugging mechanically locked stem |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Qq-p-35 fed spec single treatment response |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- B100-EU06-06 Other 9/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
- MS90353S0606 MS 9/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
- MS90353U0606 MS 9/16 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error