nuts › locknuts
MS21044D7
7/16-20 Thread Size MS21044 Self-Locking Machine Nut
Description
7/16-20 Thread Size MS21044 Self-Locking Machine Nut
Specifications
| Bearing Surface Finish | 125.0 microinches |
|---|---|
| Bearing Surface Type | Chamfered or washer faced |
| Countersink Angle | 88.0 degrees nominal nut |
| Features | Nylon Insert |
| Industry Standards/Certification | MS21044 |
| Locking Feature | Prevailing torque with nonmetallic insert |
| Lubrication | Soluble lubricant |
| Material | Aluminum |
| Material Specification | Qq-a-200/2,t6 fed spec 1st material response nut or qq-a-225/5,t4 fed spec 2nd material response nut or qq-a-225/6,t6 fed spec 3rd material response nut or qq-a-200/11,t6 fed spec 4th material response nut |
| Maximum Dimension A | 0.469 in |
| Maximum Dimension B | 0.690 in |
| Minimum Dimension A | 0.435 in |
| Minimum Dimension B | 0.679 in |
| Minimum Dimension C | 0.766 in |
| Nut Height | 0.435 nominal mils and 0.469 nominal centimeters |
| Nut Style | Hexagon |
| Service Temperature | 250 ºF |
| Surface Treatment | Anodize except insert |
| Surface Treatment Specification | Mil-a-8625 mil spec single treatment response except insert |
| Temperature Rating | 250.0 deg fahrenheit |
| Thread Class | 3b |
| Thread Direction | Right-hand |
| Thread MIL-S-8879 | 0.4375-20 |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series | UNJF |
| Thread Size | 0.438, 7/16-20 |
| Type | Self-Locking Nut |
| Weight | .005 lb |
| Width Across Flats | 0.679 inches minimum and 0.690 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS21044D7
- MS21044D10
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS21045-L7 MS 7/16-20 · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error