rivets › blind rivets
MS20605S3C5
Military Standard Blind Rivet
Description
Fastener Length: 3/8"
Specifications
| Countersink Angle | 100.0 degrees |
|---|---|
| Fastener Length | 0.390 inches maximum |
| Grip Length | 0.251 inches minimum and 0.312 inches maximum |
| Head Major Diameter | 0.179 inches minimum and 0.183 inches maximum |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Steel |
| Min. Tensile Strength (psi) | 155 pounds per square inch |
| Shank Diameter | 0.092 inches minimum and 0.097 inches maximum |
| Shank Style | Self-plugging high clinch shank |
| Shear Strength | 105 single pounds per square inch |
| Specification Data | 96906-ms20605 government standard |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416, ty 2, cl 2 fed spec single treatment response |
| Test Data Document | 81349-mil-r8814 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20605S3C2
- MS20605S3C3
- MS20605S3C4
- MS20605S3C5
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- CCR264CS3-5IPR Cherry 25/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Iron
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error