rivets › blind rivets
MS20605B4W3
Military Standard Blind Rivet
Description
Fastener Length: 9/32"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Expansion Device | Serrated stem-type w |
| Fastener Length | 0.295 inches maximum |
| Grip Length | 0.126 inches minimum and 0.187 inches maximum |
| Head Major Diameter | 0.225 |
| Head Style | Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) |
| Material | Aluminum |
| Material Specification | Mil-w-7986 mil spec single material response sleeve, Mil-w-7986 mil spec single material response stem |
| Shank Diameter | 0.124 inches minimum and 0.128 inches maximum |
| Shank Style | Pull through hollow shank |
| Shear Strength | 125 single pounds per square inch |
| Surface Treatment | Anodize or chromate |
| Surface Treatment Specification | Mil-a-8625 mil spec 1st treatment response sleeve or mil-c-5541 mil spec 2nd treatment response sleeve, Mil-a-8625 mil spec 1st treatment response stem or mil-c-5541 mil spec 2nd treatment response stem |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- MS20605B4W3
- MS20605B4W4
- MS20605B4W5
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- MS20605M4W3 MS 19/64 in · Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) · Nickel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error